В этом гайде я покажу, как просто вы можете разобрать любой предмет и собрать его обратно в крутом видео!

Нам понадобится:

• Nano Banana Pro
• Kling 2.5 Turbo
• ChatGPT (для адаптации промптов)
• Topaz Video AI (опционально, для улучшения качества)

Шаг 1: Подготовка фото

Сделайте фотографию предмета.

Лучше всего работают: гаджеты, часы, духи, наушники, камеры — любая техника или механика!

Шаг 2: Адаптируем промпт под ваш предмет

Важно! Промпты НЕ универсальные их нужно переписать под конкретный объект.

Объектив:

<aside> 💡

Create a photorealistic engineering-style exploded view of the camera lens shown in the hand.

Keep the hand, fingers, grip, wrist angle, camera angle, framing, perspective, lighting, background, and composition exactly unchanged from the original photo.

Anchor rule: the hand must continue holding the main lens barrel/body (outer housing as the fixed base piece) — this base stays in the hand and does not move.

Separate the lens into its authentic components and float them around the barrel with clean, even spacing, aligned along the lens axis: front filter ring, front glass element, internal lens groups, spacers, aperture blades assembly, focus/zoom rings, internal helicoid, stabilization module (if present), motor/gear components, electronic contacts, rear mount, screws, brackets, and internal frame parts.

Keep accurate scale, realistic materials (metal, rubber, glass reflections), sharp edges, and consistent spacing.

No parts should be invented, removed, duplicated, or warped — only split the existing lens into real components.

Do not add any text or overlays.

</aside>

Телефон:

<aside> 💡

Create a photorealistic exploded-view of the iPhone 16 Pro Max (deep blue / blue titanium) shown in the hand.

Keep the hand, finger placement, grip, wrist angle, camera angle, framing, perspective, lighting, background, and composition exactly the same as the original photo.

Important: the hand must continue holding the main phone body/frame (the outer chassis as the anchor piece) — this base part stays inside the hand and does not move.

All other iPhone components separate cleanly from that base and float around it with consistent spacing: front glass, display layers, back panel, camera module parts, lenses, buttons, screws, battery, MagSafe coil, speakers, logic board, connectors and brackets.

Components must stay aligned to their true original positions relative to the chassis, with correct scale, realistic materials, and no deformation.

Do not add or remove anything, and do not duplicate parts — only split the existing phone into authentic components.

</aside>

Зайдите в ChatGPT и напишите:

"Перепиши этот промпт для [название вашего предмета]"

Или загрузите фото предмета и попросите описать все его части.

ВАЖНО

У каждого предмета свои детали: